User Manual - C0 & C1
WARNING! DO NOT REMOVE the water-proof bag before or in use.
Start
Press the button for 5 seconds until both LED lights up; the LED will then flash every 3 seconds, indicating that the logger is working.
Make a mark
Press the button once; the RUN LED will light up for 1 second, indicating a MARK has been made successfully. Total 8 MARKs can be made.
Stop
The device will stop when
1, plugged into the computer with USB; or
2, reaching the maximum data capacity of 14,400 sets.
Get the report
Plug USB into the computer, you will see both LEDs flashing, wait a while till the RUN LED become solid, and then a flash disk will pop up with an encrypted PDF report and an editable CSV report.